Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
2006- Aspect sequence
#1
Dear all,

Attached is my attempt on Aspect sequence 2006. Your comments will be very much appreciated.


Attached Files
.pdf   Mod3_Aspect Seq_2006.pdf (Size: 67.55 KB / Downloads: 42)
Reply
#2
I'll add it to my list of things to do, but it will be a little time as it is quite a long list at present.
However in the meantime you might care to look at the comments which I gave to another attempt recently received to do some comparison.



(04-08-2014, 05:38 AM)mahyar.borhan Wrote: Dear all,

Attached is my attempt on Aspect sequence 2006. Your comments will be very much appreciated.


Attached Files
.pdf   2006 aspect sequence.pdf (Size: 252.84 KB / Downloads: 29)
PJW
Reply
#3
Here are some comments attached.
Overall along the right lines, but
1. you need to ensure that you correctly depict approach release- whether it is MAF, MAY-FA or MAR. In the MAY-FA the signal displays "Yellow and route indicator" and in the case of MAR it displays Red; the signal in rear will be showing Red at the time any approach release occurs so no aspect sequence up tp the released aspects is applicable,
2. make sure that you assign only one exit signal to a particular route indication from the entrance signal!


(04-08-2014, 06:22 AM)PJW Wrote: I'll add it to my list of things to do, but it will be a little time as it is quite a long list at present.
However in the meantime you might care to look at the comments which I gave to another attempt recently received to do some comparison.



(04-08-2014, 05:38 AM)mahyar.borhan Wrote: Dear all,

Attached is my attempt on Aspect sequence 2006. Your comments will be very much appreciated.

Many thanks Mr. Woodbridge. I will try to find my mistakes and modify the chart.


Attached Files
.pdf   Aspect sequence 2006.pdf (Size: 161.21 KB / Downloads: 28)
Reply
#4
Thank you so much for your valuable comments. I'll try to avoid these mistakes in my next attempt.
Reply
#5
(04-08-2014, 12:15 PM)mahyar.borhan Wrote: Here are some comments attached.
Overall along the right lines, but
1. you need to ensure that you correctly depict approach release- whether it is MAF, MAY-FA or MAR. In the MAY-FA the signal displays "Yellow and route indicator" and in the case of MAR it displays Red; the signal in rear will be showing Red at the time any approach release occurs so no aspect sequence up tp the released aspects is applicable,
2. make sure that you assign only one exit signal to a particular route indication from the entrance signal!


(04-08-2014, 06:22 AM)PJW Wrote: I'll add it to my list of things to do, but it will be a little time as it is quite a long list at present.
However in the meantime you might care to look at the comments which I gave to another attempt recently received to do some comparison.



(04-08-2014, 05:38 AM)mahyar.borhan Wrote: Dear all,

Attached is my attempt on Aspect sequence 2006. Your comments will be very much appreciated.

Many thanks Mr. Woodbridge. I will try to find my mistakes and modify the chart.

Thank you again for your comments.
I also found another mistake in 134 and I have corrected it as well. I am attaching the modified Aspect sequence and I hope I got it right this time.


Attached Files
.pdf   Mod3_Aspect Seq_2006_Modified.pdf (Size: 611.73 KB / Downloads: 33)
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)